Hey Hugh thanks for the fast and detailed response Consider me learned!

The mix is actually really simple, all one take, straight through no edits, no tuning and no moving stuff about. Just EQ, compression reverb / volume automationaaaa

Hi Sound On Sound gang! Hope you’re all well. I have a question for you. I have a Logic recording of a concert that I recently did. It was pretty cool because I was performing with Mainstage and then used Rogue Amoeba’s LoopBack to route the multi-output MainStage session into Logic, and it worked br ...

Although now when I record it doesn't show the waveform / red recording either the first pass or on alt takes. Massively irritating. Hey ho.

Yep checked across two different computers and it's fixed on both. Could 10.7.8 be the answer? Until we get export with AUX BUSSES....

Bob! I have just updated to the newly released (don't forget to compress the the old version) and it seems the issue we have been suffering with has been fixed. Only tried on one project so far but it's been tool selection heaven! Even the fader / zoom tool bug seems to have resolved. Too exciting ...

Bob! I have this exact problem and it drives me insane! For years I've had the issue where I select the "fade" tool and for some reason the "zoom" tool is selected instead. Cue screen zooming madness. I mentioned it to other Logic users and it seemed no one else had experienced this. Then with the ...

Nice one Adam. Thanks for sharing the positive experience. I will have another go at it in the future and maybe as Chromeman mentioned, I'll do a clean install. Does anyone know if it's an automated process to clean install and then copy all the data across in one go? Or is it a manual job? Which ...

Hey Chromeman I updated with the data in place.

Hi Mac gang, I just wanted to let you know that upgrading my production laptop to Big Sur last week was so disastrous that I was forced to delete my system drive and copy my Catalina cloned backup back onto the laptop. I'm sure there are lots of people out there who've had a smooth ride but in case ...

https://support.apple.com/en-us/HT203718

Remember to backup your current version before updating!

Hey folks fingers crossed the latest 10.6.3 release might address this situation...

Fingers crossed!

https://support.apple.com/en-us/HT203718

OK. Good advice. Thanks Desmond. I'm about to have a little experiment. Let's see.

Guys - thank you for the detailed responses and interest in this. I’ll try what you said Desmond. Sounds like you’ve tested already but I’ll experiment with different routings and various levels of complexity and report back. Your comment about multiple routings creating an effect resonated (no pun!) ...

Hi folks, I have a recurring issue when bouncing out stems for mixing and I'd love to know if I'm either doing something wrong to if it's just "the way it is"? In my Logic sessions I always use many busses for grouping and for effects. I'd say I regularly have up to 30 busses per song project. And ...

Hey guys, I am the lucky receipient of a new 2018 MacBook Pro. I’m SO excited! 32GB Ram and 2TB ssd. I went for the slower i7 processor as I’ve often bought the biggest in preveious years and they always seem to run hot. It’s a big jump from my last laptop (mid 2015) anyways so I thought I’d try this ...

Wow. Literally posted this and tired it again and it now works as expected. It's been going on for days. SO Weird. That's the SOS magic right there.

On another note is there a way of deleting a post one has made? I must be going mad (der).

Thanks and sorry for wasting time!

Hi all,

If I use the marquee tool to create a dip in volume automation I am unable to then adjust the position of the resulting nodes. I just checked and it works fine in LPX 2.4. AM I doing something wrong here or is this a bug?

Cheers,

Beardy.

If you swap hard drives on the MBP, you have to be VERY careful with the ribbon cable. I have had a few, where I lifted the hard drive out a bit too high before removing the cable, and it tugged on the cable, it causes weird issues. The cable never looked bad at all, but changing out the cable ...

Thanks Bob the Dog. I tried that and no joy. It's quite strange. I've asked a few mac specialists and they all said it shouldn't be an issues to swap the drive. I took both laptops into the Apple Store today. Sure enough my original laptop has the graphics chip problem. The new one I bought doesn't ...

I clicked on this thread last week and thought "that's the model my laptop is. Hope mine doesn't do that". 24 hours later and sure enough the screen freezes and goes all stripy and now nothing. I'm booked in on Monday to the Apple store in Liverpool but in the meantime I bought a second hand early ...

Hi folks. I installed an OWC SSD in my early 2011 MBP's optical bay. I used it as a system drive, storage of sound libraries and all the core data I needed. It ran great and was so fast and quiet. Sadly it suddenly just died for no apparent reason and everything was gone instantly. Luckily I had ...

Hey guys, Thanks for all your responses and sincere apologies to those of you who found my lack of certain knowledge tedious! For the record I now realise I don't have a Logic 9 install disc. I have the Logic Studio version 8 install discs. The question is how I got to Logic 9 as I didn't do it via ...

In which case it must be a a previous version as once I click the install Logic icon it immediately tells me it won't install Power PC software. My mistake. Apologies. So I don't actually have a Logic Pro 9 DVD. Hmm. Any ideas how I could proceed from here?

Thanks again and best wishes,

Paul.

Hey Mike,

Thanks for the reply. Yeah the DVD I have is pre Intel. I have an external DVD drive for stuff but no dice with this Logic 9 DVD. Any other thoughts?

Cheers,

Paul.

Hi folks, I've got a 2011 MacBook Pro with 2 hard disks installed. I replaced the optical drive with an SSD. On the SSD I've got Mountain Lion whilst on the older Hard Drive I've got Lion. What I'd love to do is install Logic Pro 9 onto the SSD/ Mountain Lion system. I've tried copying the ...