Indeed I did. I'll bow out
Search found 1991 matches
Re: Electric guitar + violin bow
Indeed I did. I'll bow out
- Forum: Guitar Technology Topic: Electric guitar + violin bow Replies: 37 Views: 1614
 
Re: Electric guitar + violin bow
I think Jimmy Page beat you to it.  
 kashmir?
					- Forum: Guitar Technology Topic: Electric guitar + violin bow Replies: 37 Views: 1614
 
Re: Pedal into Hi-Z question.
 The makers of them boast of a "musical discrete FET input" which is "distortion" in engineering terms! I think the 4K button switches the 'SSL Attitude' in and out as required. I don't know whether it works on the instrument inputs though as they seem to bypass any other processing. Won't really ...
					- Forum: Recording: Gear+Techniques Topic: Pedal into Hi-Z question. Replies: 5 Views: 461
 
Re: Pedal into Hi-Z question.
Thanks guys, I figured it would probably be okay because people use pedals directly before the instrument input into a guitar amp. But now I feel reassured I won't cause any damage by trying it. I'll start with the pod go volume fairly low and see how it sounds.
					- Forum: Recording: Gear+Techniques Topic: Pedal into Hi-Z question. Replies: 5 Views: 461
 
Pedal into Hi-Z question.
I've just purchased & set up the SSL 2+ Mark II which has 2 Neutrik XLR Combo sockets for Mic/Line inputs mounted on the rear. Purely for convenience is it okay to plug the line outs from my Pod Go into the Hi-Z instrument sockets on the front just for monitoring when practicing (not when recording ...
					- Forum: Recording: Gear+Techniques Topic: Pedal into Hi-Z question. Replies: 5 Views: 461
 
Re: Planning to buy a record player
IIRC the seventies were more about music centres than radiograms. They had a record deck, tuner and cassette player integrated with separate stereo speakers. I had a Bush music centre with a Garrard record deck built in which is possibly why my records still sound okay. The eighties were all about ...
					- Forum: DIY | Electronics | Studio Design Topic: Planning to buy a record player Replies: 15 Views: 733
 
Re: Planning to buy a record player
New vinyl is too expensive to ruin on a cheap record deck. If you do decide to go for separates be sure either the amp has a phono input or the record deck has a built in pre-amp. Many modern amps won't accommodate a record deck without a separate pre-amp. Even secondhand it probably won't be cheap ...
					- Forum: DIY | Electronics | Studio Design Topic: Planning to buy a record player Replies: 15 Views: 733
 
Re: mid/side mic question
 Mike - the long lead shouldn't make any difference - it is very common to use 30m or longer cables on mics via multicores in a live situation or in a large studio. I'm not sure which mic preamps are used on the R8 but if it is the same design as the H series recorders then you'll probably find the ...
					- Forum: Recording: Gear+Techniques Topic: mid/side mic question Replies: 75 Views: 3050
 
Re: mid/side mic question
 Yeah but you weren't hot plugging a budget ribbon into a Behringer mixer :oops: ... Either way I considered the Fethead would be a useful addition to the toolbox and I've been thinking about buying one anyway... My R144 arrived from Andetons over the weekend. I've not recorded anything yet but just ...
					- Forum: Recording: Gear+Techniques Topic: mid/side mic question Replies: 75 Views: 3050
 
Re: Moth
 I'm not sure what you mean by 'heavily processed'. The Gilmour guitar's just guitar>tube amp. Maybe you mean the left/right distortion guitars that crash in on the first note of some bars? Sorry, heavily distorted perhaps. If I close my eyes it goes from mellow jazzy lounge to Pink Floyd rock with ...
					- Forum: Self-Promotion Topic: Moth Replies: 27 Views: 1450
 
Re: Moth
Laid back, dark & tasteful. It's what draught Guiness would sound like if it made a noise.  
					- Forum: Self-Promotion Topic: Moth Replies: 27 Views: 1450
 
Re: Neumann KH120 Error Code ID?
 Rep of Ireland I'm afraid! A friend may have found the issue (short between two pins of a pair of IC's). Doing my best to avoid sending them to one of Neumanns repair centres as the designated one for Ireland is in the UK, which means import tax and export etc. Thanks for your replies. I'm not sure ...
					- Forum: Recording: Gear+Techniques Topic: Neumann KH120 Error Code ID? Replies: 13 Views: 640
 
Re: Which budget semi hollow whould you go for?
 Probably the guitar I most regret parting with was my Aria TA-50 in Wine Red. An Aria TA-50 sold 165 in October auction site. Wish I'd know I'd have put a bid in upto 200. I had a Harley Benton HB35 semi hollow. Picked it up from cash converters of all places under a ton. Pretty alright. https ...
					- Forum: Guitar Technology Topic: Which budget semi hollow whould you go for? Replies: 28 Views: 1147
 
Re: Aria TA guitars
 IME pickups make the single biggest difference between one electric guitar and another and tend to overshadow the other differences. But some people can hear these differences and consider them sufficient to lead them to certain guitar/pickup combinations. I tend to agree regarding pickups making ...
					- Forum: Guitar Technology Topic: Aria TA guitars Replies: 19 Views: 983
 
Re: Aria TA guitars
 Thanks for your reply. The link you posted is really interesting for a couple of reasons - it identifies which models have which finishes - should help navigate the murky waters of internet searches, why do serial numbers not follow a logical pattern? The list of artists on the site endorsing Aria ...
					- Forum: Guitar Technology Topic: Aria TA guitars Replies: 19 Views: 983
 
Re: Aria TA guitars
This looks to be an interesting link http://www.matsumoku.org/cm_models/2024/11/26/1984-september-price-list/ though I've not fully explored it yet. I also think there were different versions of each TA over the years & the numbering wasn't entirely consistent. I think all the TA series were double ...
					- Forum: Guitar Technology Topic: Aria TA guitars Replies: 19 Views: 983
 
Re: Which budget semi hollow whould you go for?
Probably the guitar I most regret parting with was my Aria TA-50 in Wine Red. It wasn't particularly expensive new & they don't sell for big money secondhand. I currently have a limited edition Duesenberg Alliance Series which I'll never part with for sentimental reasons, but in terms of tonality ...
					- Forum: Guitar Technology Topic: Which budget semi hollow whould you go for? Replies: 28 Views: 1147
 
Re: A visit to Auden Guitars
 They are awaiting (well over a year's wait so far) a power supply upgrade before they can finish commissioning all the new CNC machinery they have, which will allow them to produce a much larger number of guitars than at present. These will be mainly for the Japanese and US markets. Auden acoustics ...
					- Forum: Guitar Technology Topic: A visit to Auden Guitars Replies: 16 Views: 884
 
Re: Good voice morphing tool?
I smoked 40 a day for 40 years. Tom Waits sounds like my little sister. Rod Stewart sounds as smooth as silk to me. There's no substitute for artistic commitment.  
					- Forum: Mixing | Mastering | Post Production Topic: Good voice morphing tool? Replies: 34 Views: 806
 
Re: USB leads.
Leads arrived, fitted & working fine. So now I have an empty space on the desk just the right size for an EH Pog 3 & Christmas is just around the corner!  
					- Forum: DIY | Electronics | Studio Design Topic: USB leads. Replies: 15 Views: 577
 
Re: Speaker Isolation Feet/Stands
I bought the IsoAcoustics speaker stands shortly after they were reviewed in SOS and been very pleased with them. However in the past I've used a couple of layers cut from a camping sleeping mat with pretty good results regarding isolation. You'd easily get a couple of layers from a single mat cut ...
					- Forum: DIY | Electronics | Studio Design Topic: Speaker Isolation Feet/Stands Replies: 30 Views: 1174
 
Re: USB leads.
Lindy cables incoming. Very reasonable prices too.  
					- Forum: DIY | Electronics | Studio Design Topic: USB leads. Replies: 15 Views: 577
 
Re: What are the frequency zones in 2 band car EQ's?
 The thought did cross my mind... I started driving in the '70s when the motor car was being touted as the ideal environment to listen to 'HiFi' because all the occupants sat in a fixed position. They didn't seem to understand that that meant they were all sitting in the wrong position :headbang: My ...
					- Forum: Mixing | Mastering | Post Production Topic: What are the frequency zones in 2 band car EQ's? Replies: 18 Views: 569
 
Re: What are the frequency zones in 2 band car EQ's?
Drew Stephenson wrote: ↑Mon Dec 02, 2024 12:17 pmDynamic Mike wrote: ↑Mon Dec 02, 2024 1:49 am I presume Analogue Dither Shaping would be warmer but more expensive.
It's basically the same as heated seats.
I can testify that Meridian Digital Dither Shaping does nothing to reduce the wordlength of my wife. I do like heated seats though.
- Forum: Mixing | Mastering | Post Production Topic: What are the frequency zones in 2 band car EQ's? Replies: 18 Views: 569
 
Re: What are the frequency zones in 2 band car EQ's?
 My car uses dithering to make the music sound better than when it was recorded. It must be true because it says so in the manual and they even made a video to explain how. I'd link to it but I'm frightened Hugh might self-implode. :lol: You mean it makes you indecisive at junctions when listening ...
					- Forum: Mixing | Mastering | Post Production Topic: What are the frequency zones in 2 band car EQ's? Replies: 18 Views: 569