A bit far for me. Hopefully Radio Norwich will be able to spare one of their ace reporters to send in a report.

An ideal opp0rtunity for SOS to have an article on copyright.
Which would obviously carry its weight in print over the 7 continents.

Ta, Ill give that a go if only to compare it Chick's mark V.

I was lured in for the DX anicdotes/gossip and stayed for the Don Lewis, a name which was unfamiliar to me.

Just catching up on uTube, here is one amazing piece on the
Roland VP550 : swing low sweet chariot -

https://www.youtube.com/watch?v=RBG8T2f3uBE

That already sounds more interesting than watching someone hunched over their laptop onstage! I always wanted to go and see the 4 german blokes hunched over their laptops onstage but never quite managed it. https://www.youtube.com/watch?v=2r2QhE0VElE is this the Popcorn you were thinking of ? [igno...

The mounting bolt that goes through the middle of the torrid is subjected to the magnetic field and acts like a 1 turn seconday coil, with a potential at either end. The bolt should only connect to a metal chassis at one end and be an "open circuit". If both the top and bottom connect to t...

https://www.rapidonline.com/Transformers CPC & Rapid have a reasonable selection of 18-0-18V transformers. The Rapid site is a bit more searchable/filterable. They also do enclosures [some plug top style]. Extra care is required mounting torroidals to make sure the bolt through the middle doesnt...

Yes, open circuit and under load preferably. ------- My Behringer MXUK5 specs: 230V~ 50Hz 105mA 31W 2x 17.5V ~, 2x 650mA measured 18.25v a.c. open circuit note that there seem to be 2 types of MX5UK, 230V 31W & 240V 20W maybe its only the label thats changed. I got mine from either Thomann, CPC ...

My choice, among many of course, would be a Yamaha Montage 88, great synthesis engines, superb acoustic and electric pianos, plus sampling (sample bot is crazy, amazing) plus, it’s an audio interface, and has external audio inputs. If your budget is in that range, it’s a no brainier IMO. Also check...

Yes, 17.5V 0 17.5V AC Behringer part # MXUK5. I have had two 1202s and they are very good for the money, bit daft operationally but quiet and flexible . Both my supply connectors were unreliable but others have had no trouble with theirs. Dave. I have a 1204, its very usefull as a sub mixer & f...

Dont forget the YAMAHA RX11, very 80's

is this the one ? https://www.andertons.co.uk/behringer-psu6-uk-analog-mixer-power-supply?utm_source=google&utm_medium=organic&utm_campaign=surfaces&gclid=EAIaIQobChMI2fK4jO_t_AIVE-J3Ch2OUQFVEAQYAiABEgIThvD_BwE once you know the part number you can shop around, or look at images showing ...