
Search found 71 matches
Re: Routing via Outboard
Brilliant thanks a lot 

- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: Routing via Outboard
Yeah it's quite a strange one, not something I've came across before. Was half expecting to be advised to throw money at it with an expensive plug in purchase, so glad to hear it's possible to tackle it with basic plugs. I'm short on experience with dynamic eq and multi band compressors...is there a...
- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: Routing via Outboard
While I'm here...I have recorded a guitar part and then routed it through my channel strip in the way spoken about in this thread. I am happy with how it sounds although I'm hearing a high pitched ringing sound on it somewhere....assuming it's maybe been pumped too hard through the compressor or som...
- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: Routing via Outboard
Just a wee follow up to this, I've spent the last couple of days exploring this issue again and I think I've cracked it now. Basically the id mixer software has to be open in order for the ping detect to go through. That was the thing that was holding me back. My only issue now is latency but I'll h...
- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: An Album that altered our Musical direction
Enjoyable read here chaps (and chapettes?). Some opinions that resonate and some that are way above my scope of reasoning. Great stuff. I've loads of albums that I love but the one that has impacted me more than any other is The Stone Roses' debut. Came across it at a house party when I was 16 (a fe...
- Forum: Music Theory, Songwriting & Composition Topic: An Album that altered our Musical direction Replies: 126 Views: 2966
Re: A good point, well made
My live gig experience is slightly different to the scenario discussed here, but it does fall under a similar circumstance. I play just me and an acoustic and have never bothered about what equipment I use. Plug straight in to the desk, adjust the eq, reverb and levels to suit and away I go. The thi...
- Forum: Guitar Technology Topic: A good point, well made Replies: 47 Views: 1527
Re: Good Reading Suggestions
My first issue is the requirement of a good knowledge of complex numbers. After an hour or so on YouTube I've come to realise that I must not have been in that day at school 20-odd years ago :shocked: If you've got some spare time you could learn complex numbers and how they apply to waves. If you ...
- Forum: DIY Electronics & Studio Design Topic: Good Reading Suggestions Replies: 18 Views: 706
Re: Examples of Electronic "rock" music.
Check out the Primal Scream albums XTRMNTR and Evil Heat. The former is one of my all time favourites, the latter hits higher heights but has a few not so great.
Special mentions for Autobahn 66, Miss Lucifer and Accelerator.
Special mentions for Autobahn 66, Miss Lucifer and Accelerator.
- Forum: Music Theory, Songwriting & Composition Topic: Examples of Electronic "rock" music. Replies: 33 Views: 1829
Re: Routing via Outboard
Gave this another whirl tonight but still not getting great results. At this point I'm considering what benefits I'd even get by seeing it through. The Presonus Studio Channel was bought mainly for tracking and to save on the processing power of my very basic laptop. However, learning about the work...
- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: Routing via Outboard
OK cool, I'm away from the laptop now so will start afresh next chance I get. Will update over the weekend, thanks again for your help.
- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: Routing via Outboard
Cheers guys, still no joy. There must be something daft I'm missing I'll try explain exactly where I'm at. I'm running a mono jack from output 3 of the Audient to the jack input of the outboard. Then mono jack from the output of the outboard going into input 1 of the Audient. That's pretty straightf...
- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487
Re: Routing via Outboard
OK cheers, I'll have a rummage around youtube and see what I can find. I may be back for more detailed requests 

- Forum: Mixing, Mastering & Post Production Topic: Routing via Outboard Replies: 17 Views: 487