crackling noise from DI box

Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…
Post Reply

crackling noise from DI box

Post by gogi »

I recently used my Behringer Ultra 400P DI box with an electric guitar . The DI box was then connected to a mixer. I observed crackling sounds whenever the DI box was mildly touched not to talk of whenever it was physically moved around.

I changed the cables and it persisted. I changed the DI box , retained the cables and it stopped. It seems there is a partial contact associated with the 1/4" female jack connector inside the DI box.

Will appreciate suggestions on solving this problem with the DI box producing the crackling sound once touched!
gogi
Regular
Posts: 124 Joined: Mon Dec 31, 2012 12:00 am

Re: crackling noise from DI box

Post by Wonks »

If it's new enough, then take it back under warranty (it has a 3-year one). If not, then opening it up and re-making all the soldered joints is likely to be the only answer.

But Behringer and DI boxes don't go well together. You'd be better off dumping it and getting something like the Orchid DI box that's highly recommended here.
User avatar
Wonks
Jedi Poster
Posts: 19208 Joined: Thu May 29, 2003 12:00 am Location: Freethorpe, Norfolk, UK
Reliably fallible.

Re: crackling noise from DI box

Post by gogi »

Thanks. I don't live in the UK. I buy most of my gear form the US so the Orchid Box is out of it form the point of shipment. Which budget priced passive DI boxes available in the US will you recommend ? I also have the Live wire SPDI passive box.

I have heard many not too good feedback about Behringer products (with the sole exception of their famous X32 digital mixer). Does anyone have negative views of this active passive box that supposedly emulates a 2x 12 cab?

http://www.musiciansfriend.com/pro-audi ... g-gi100-di
gogi
Regular
Posts: 124 Joined: Mon Dec 31, 2012 12:00 am

Re: crackling noise from DI box

Post by James Perrett »

As Wonks says, Behringer don't have a great reputation for DI boxes (although much of their other gear is good). In the US I'd look at the Whirlwind IMP2 - I've used one for many years with no problems.
User avatar
James Perrett
Moderator
Posts: 16984 Joined: Mon Sep 10, 2001 12:00 am Location: The wilds of Hampshire
JRP Music - Audio Mastering and Restoration. JRP Music Facebook Page

Re: crackling noise from DI box

Post by Wonks »

gogi wrote: Does anyone have negative views of this active passive box that supposedly emulates a 2x 12 cab?

http://www.musiciansfriend.com/pro-audio/behringer-ultra-g-gi100-di

That's one of their better ones, being a direct copy (so I'm told by those that know) of a much more expensive H&K Red Box cab simulator.

I have no idea how it fares on the noise front with its current components, but sound-wise it was a good match for the H&K unit.
User avatar
Wonks
Jedi Poster
Posts: 19208 Joined: Thu May 29, 2003 12:00 am Location: Freethorpe, Norfolk, UK
Reliably fallible.
Post Reply