![Image](https://i.imgur.com/QOeYTv4.jpg)
The All-New Behringer Keyboards 'n' Stuff Thread
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Roland have had more than long enough to satisfy the demand for this one, yet have chosen to not only ignore it, but even belittle the idea as 'chasing ghosts'.
This is one I can definitely get behind.
This is one I can definitely get behind.
An Eagle for an Emperor, A Kestrel for a Knave.
- Eddy Deegan
Moderator -
Posts: 9131 Joined: Wed Sep 01, 2004 12:00 am
Location: Brighton & Hove, UK
Contact:
Some of my works | The SOS Forum Album projects
Re: The All-New Behringer Keyboards 'n' Stuff Thread
And I though it would be wrong of me not to post this but Behringer seem to be on a roll... Looks like Dave's got some competition ![Wink ;)](./files/images/smilies/icon_e_wink.gif)
![Image](https://scontent.fbrs4-2.fna.fbcdn.net/v/t39.30808-6/228391323_10159532374028914_224687596923873640_n.jpg?_nc_cat=106&ccb=1-3&_nc_sid=973b4a&_nc_ohc=KYj0V1FwX6sAX_ozmvL&_nc_ht=scontent.fbrs4-2.fna&oh=bd5402663b38ad313918a16881e17e90&oe=6108BCF0)
![Image](https://scontent.fbrs4-1.fna.fbcdn.net/v/t39.30808-6/217897741_10159532374058914_3819524411384988682_n.jpg?_nc_cat=100&ccb=1-3&_nc_sid=973b4a&_nc_ohc=-YpkMnkNLzIAX92ghAU&_nc_ht=scontent.fbrs4-1.fna&oh=ead4586c4616dcc92ca0804a615dfcd1&oe=610A2CCA)
It appears to be a 16 voice Prophet 5 clone, guess it will be a fair bit cheaper than even the 5 voice DSI/Sequential Rev 4., wonder which revision it will clone or if it will be switchable?
![Wink ;)](./files/images/smilies/icon_e_wink.gif)
Behringer FB wrote:Prototype completed. Firmware development in full force.
![Image](https://scontent.fbrs4-2.fna.fbcdn.net/v/t39.30808-6/228391323_10159532374028914_224687596923873640_n.jpg?_nc_cat=106&ccb=1-3&_nc_sid=973b4a&_nc_ohc=KYj0V1FwX6sAX_ozmvL&_nc_ht=scontent.fbrs4-2.fna&oh=bd5402663b38ad313918a16881e17e90&oe=6108BCF0)
![Image](https://scontent.fbrs4-1.fna.fbcdn.net/v/t39.30808-6/217897741_10159532374058914_3819524411384988682_n.jpg?_nc_cat=100&ccb=1-3&_nc_sid=973b4a&_nc_ohc=-YpkMnkNLzIAX92ghAU&_nc_ht=scontent.fbrs4-1.fna&oh=ead4586c4616dcc92ca0804a615dfcd1&oe=610A2CCA)
It appears to be a 16 voice Prophet 5 clone, guess it will be a fair bit cheaper than even the 5 voice DSI/Sequential Rev 4., wonder which revision it will clone or if it will be switchable?
Re: The All-New Behringer Keyboards 'n' Stuff Thread
DGL. wrote: ↑Fri Jul 30, 2021 9:47 pm And I though it would be wrong of me not to post this but Behringer seem to be on a roll... Looks like Dave's got some competitionBehringer FB wrote:Prototype completed. Firmware development in full force.
It appears to be a 16 voice Prophet 5 clone, guess it will be a fair bit cheaper than even the 5 voice DSI/Sequential Rev 4., wonder which revision it will clone or if it will be switchable?
OK, I’m going to be severely challenged in the smuggling department soon, a VCS3, now this Prophet, my partner keeps wondering why my friend is loaning me so many keyboards.
My modular, thanks to Behringer, is growing like our garden in summer, it’s getting difficult passing modules off as "been in storage" where? she keeps saying.
![Smile :)](./files/images/smilies/icon_e_smile.gif)
Re: The All-New Behringer Keyboards 'n' Stuff Thread
But it's not an original, and you have told us many times that you won't buy anything but the original of so much gear - why is this one different? (Let's save you some money) ![Wink ;)](./files/images/smilies/icon_e_wink.gif)
![Wink ;)](./files/images/smilies/icon_e_wink.gif)
An Eagle for an Emperor, A Kestrel for a Knave.
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Elf, I have the Reissue Pro 5, but this is sixteen voices, and that’s more, so it’s better obviously
![Smile :)](./files/images/smilies/icon_e_smile.gif)
I’m going to get the Berry, just out of curiosity, if it’s that good, I may sell the Reissue, in fact, that can be my excuse from now on "out of curiosity"
![Very Happy :D](./files/images/smilies/icon_e_biggrin.gif)
Re: The All-New Behringer Keyboards 'n' Stuff Thread
I really hope Focusrite fight this one.
-
- Guest
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Me too. Despicable business practices IMHO.
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Pretty much, yeah. Why not at least come up with your own styling if you’re going to build something ‘inspired’ by someone else’s idea? The Prophet 5 and 10 are current products available to buy new today from the original manufacturer.
B……. have some talented people working for them. Surely they could cobble together a different external design. They choose not to though because they know they’ll make money based on the fact that their synth looks like the original. All of the marketing has been done for them already.
Having said all that, this sort of practise happens in lots of industries so it’s not just B……..
I sometimes wonder if it’s any different to plugin developers using the same graphics as the gear they are emulating.
Dan
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Some extra info from FB about the Pro-16, circuitry of all 3 revisions inside!
Behringer FB wrote:For all of you who are technically interested, you can easily witness the incredible complexity of the PRO-16. This synth uses over 6,000 components! Not only did we employ the original circuitries of all 3 revisions, we also added many features such as 16 voices, multi-timbrality, LCD display and a lot more. We started the ideation of this project around 5 years ago and it has since grown into an incredibly powerful flagship synth.
We still need many more month to finalize the firmware, but we’re confident that it’ll be much faster than the UB-Xa.
We’re hopeful to share some sounds with you in the near future.
Are you as excited as we are?
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Dan LB wrote: ↑Mon Aug 02, 2021 12:34 am
Pretty much, yeah. Why not at least come up with your own styling if you’re going to build something ‘inspired’ by someone else’s idea? The Prophet 5 and 10 are current products available to buy new today from the original manufacturer.
B……. have some talented people working for them. Surely they could cobble together a different external design. They choose not to though because they know they’ll make money based on the fact that their synth looks like the original. All of the marketing has been done for them already.
Having said all that, this sort of practise happens in lots of industries so it’s not just B……..
I sometimes wonder if it’s any different to plugin developers using the same graphics as the gear they are emulating.
Dan
To be honest, the plugin developers are much worse in this than Behrenger is.
The Prophet design is so integral to the actual functionality of the instrument and how one uses it that if they applied their own design to it, then it wouldn't actually work in a similar way and wouldn't achieve the desired results. This generation of synths tended to use off-the-shelf components (which is why Behrenger can keep churning these out, obviously) and therefore really differentiated themselves by how they were used in the design usage of the components and the implementation of the interface. If you change the interface around, you get different results because you approach it differently due to the different limitations and strengths of what was made available. I agree that it doesn't need to ape the graphic design exactly, but that's playing to the market.
Plugin interfaces, on the other hand, are completely useless affectations that often get in the way of actual programming. As far as I'm concerned, with most of them the interface is there to try to create a bridge effect that makes the user think the plugin is a more accurate emulation of a specific vintage synth, so they can sell it for a premium, instead of just being yet another synth plugin. The interface itself makes the plugin worse and more difficult to use, and serves no real purpose.
Anyway the current Sequential isn't the original Sequential, they're cashing in on the surging market as much as Behrenger.
DGL. wrote: ↑Mon Aug 02, 2021 5:05 pm Some extra info from FB about the Pro-16, circuitry of all 3 revisions inside!Behringer FB wrote:For all of you who are technically interested, you can easily witness the incredible complexity of the PRO-16. This synth uses over 6,000 components! Not only did we employ the original circuitries of all 3 revisions, we also added many features such as 16 voices, multi-timbrality, LCD display and a lot more. We started the ideation of this project around 5 years ago and it has since grown into an incredibly powerful flagship synth.
We still need many more month to finalize the firmware, but we’re confident that it’ll be much faster than the UB-Xa.
We’re hopeful to share some sounds with you in the near future.
Are you as excited as we are?
Welp, so much for affordability then.
Re: The All-New Behringer Keyboards 'n' Stuff Thread
An Eagle for an Emperor, A Kestrel for a Knave.
Re: The All-New Behringer Keyboards 'n' Stuff Thread
That was good to read
![Thumbup :thumbup:](./files/images/smilies/icon_thumbup.gif)
Much as it's clear that Behringer did the right thing here I still think it was cheeky of them at best to register the Oberheim trademark in the first place.
Still, a good thing is a good thing. I'd like to see more of it!
- Eddy Deegan
Moderator -
Posts: 9131 Joined: Wed Sep 01, 2004 12:00 am
Location: Brighton & Hove, UK
Contact:
Some of my works | The SOS Forum Album projects
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Interesting development:
Apparently a successor to the BCR2000 is on the cards. Preview here:
https://www.juno.co.uk/junodaily/2021/0 ... sequencer/
... and this time it looks like Behringer is actually working with the designer of rather cool sequencer firmware for it..
Apparently a successor to the BCR2000 is on the cards. Preview here:
https://www.juno.co.uk/junodaily/2021/0 ... sequencer/
... and this time it looks like Behringer is actually working with the designer of rather cool sequencer firmware for it..
- Folderol
Jedi Poster -
Posts: 18739 Joined: Sat Nov 15, 2008 12:00 am
Location: The Mudway Towns, UK
Contact:
Yes. I am that Linux nut {apparently now an 'elderly'}
Onwards and... err... sideways!
Onwards and... err... sideways!
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Nice, indicative RRP £110, which is good as BCR2000s have been selling, or at least listed, for silly money in recent years. It also looks like a nicer-shaped box - a simpler flat rectangle. The BCR2000 is a clunky beast - I say that as an owner.
And it has a display which, although tiny, can actually tell you something more than 3 digits. It will probably make a lot of people happy and hey, they are at least cloning one of their own products!
And it has a display which, although tiny, can actually tell you something more than 3 digits. It will probably make a lot of people happy and hey, they are at least cloning one of their own products!
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Don't care about all the sequencer stuff but as a replacement for my occasionally-dodgy BCR it's looking like a suitable price point. Hopefully there'll be a decent midi-mapping tool for it as well.
- Drew Stephenson
Apprentice Guru -
Posts: 25795 Joined: Sun Jul 05, 2015 12:00 am
Location: York
Contact:
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
- Hugh Robjohns
Moderator -
Posts: 40004 Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Contact:
Technical Editor, Sound On Sound...
(But generally posting my own personal views and not necessarily those of SOS, the company or the magazine!)
In my world, things get less strange when I read the manual...
(But generally posting my own personal views and not necessarily those of SOS, the company or the magazine!)
In my world, things get less strange when I read the manual...
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Similarly I have zero interest in the sequencer (I wonder if Behringer have been blind-sided by a few vociferous enthusiasts in that direction?), but it should be a flexible option to suit many purposes.
I would need an overlay to remove a lot of that very confusing text!
I would need an overlay to remove a lot of that very confusing text!
An Eagle for an Emperor, A Kestrel for a Knave.
Re: The All-New Behringer Keyboards 'n' Stuff Thread
- Drew Stephenson
Apprentice Guru -
Posts: 25795 Joined: Sun Jul 05, 2015 12:00 am
Location: York
Contact:
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Good to see the BCR back, there is nothing like it, especially at that price.
A good PC-BCR app would be appreciated too.
I get the impression that the sequencer mod is very popular with sequencer-ists [and good for Behringer as they sold more units to an unintended sector].
A good PC-BCR app would be appreciated too.
I get the impression that the sequencer mod is very popular with sequencer-ists [and good for Behringer as they sold more units to an unintended sector].
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Considering the sequencer is already available and popular, I'd guess it was trivial to add it to the new version. Better to have it and not need it sort of thing, especially with their eurorack modules.
Sweetwater dropped me a line a few days ago letting me know that they should finally be getting the RD-9s in by the end of September/early October, if anyone needs an indication of the lag time they're dealing with these days. They were supposed to be available something like seven or eight months ago. Some people were speculating that the release was delayed so they could iron out firmware issues that were shared with the RD-8, but given allthe newsI've seen recently about gargantuan shipping delays globally my guess is that they've had them ready for a while and just haven't been able to move them around. Perhaps rather than release them piecemeal (and further frustrate customers with long shipping delays) they've been working to cover initial demand.
I picked up one of their wired headsets for work use earlier this year and it was about the same amount of time between the page going up on Sweetwater to when they actually had them in stock by the time I got it in late April, so I'll be pleasantly surprised if they manage to get some of these apparently completed projects in consumer hands by the end of the year.
Sweetwater dropped me a line a few days ago letting me know that they should finally be getting the RD-9s in by the end of September/early October, if anyone needs an indication of the lag time they're dealing with these days. They were supposed to be available something like seven or eight months ago. Some people were speculating that the release was delayed so they could iron out firmware issues that were shared with the RD-8, but given allthe newsI've seen recently about gargantuan shipping delays globally my guess is that they've had them ready for a while and just haven't been able to move them around. Perhaps rather than release them piecemeal (and further frustrate customers with long shipping delays) they've been working to cover initial demand.
I picked up one of their wired headsets for work use earlier this year and it was about the same amount of time between the page going up on Sweetwater to when they actually had them in stock by the time I got it in late April, so I'll be pleasantly surprised if they manage to get some of these apparently completed projects in consumer hands by the end of the year.
Re: The All-New Behringer Keyboards 'n' Stuff Thread
Brains review.
Starts with a ramble through a tree swamp, which sets the tone for the rather talky video.
https://www.youtube.com/watch?v=M-j7vR3zQno
![Image](https://mediadl.musictribe.com/media/marketing_images/P0E6H/Image_BRAINS.png)
Starts with a ramble through a tree swamp, which sets the tone for the rather talky video.
https://www.youtube.com/watch?v=M-j7vR3zQno
![Image](https://mediadl.musictribe.com/media/marketing_images/P0E6H/Image_BRAINS.png)
DGL. wrote: ↑Tue Jun 15, 2021 7:11 pmN i g e l wrote:Moog & Arp "referenced" each others designs. They opted to come to an agreement rather than spend money on lawyers & court fees.Arpangel wrote:The Elf wrote:Brains...
https://youtu.be/U59OzyB6lBM
This is getting crazy, it’s just a rip-off of Braids, but at least, that’s not made anymore!
What next?
Im not upto speed on this but I think braids/plaits are open source and are also used in the Arturia Microfreak & can be used in the Korg Prologue ???
Yes,Behringer.com wrote:20 digital oscillators including 15 Mutable Instruments Plaits* engines for infinite sound creation
https://www.behringer.com/behringer/pro ... Code=P0E6H
It seems to have more models than the plaits, plus it has the waveform OLED display.Behringer.com wrote:Visible Wavelengths
If having 20 digital oscillator modes wasn’t cool enough, BRAINS has an integrated and inspiring OLED display so you can visualize and adjust waveforms exactly the way you want them to be. Plus, having a screen with dancing waveforms on your synth is just plain awesome!
So it is using open source software (which is linked to on the product page) plus some extras done by them, so nothing really wrong there. Remember Arturia claimed they had worked with Mutable on the microfreak but in the end all they had used was the open source software, and Mutable rightly got a bit annoyed at that.
I also understand that this is the work of their Italian division, if that matters.