So -- I mentioned a little while back (probably early Spring) that I'm starting a new project specifically because I wanted to use bits of gear that have hitherto gone unused; namely, my Boutique JP-08 and KeyStep Pro.
My original plan was to use two drum machines: the DR-550 and SR-16. The plan in my head was that one drum machine would play a suite of percussion sounds and the other machine would play just a handful of sounds but at preset velocities to make sequencing easier.
Well, this turned out to be a bit of a disaster because that only works if you are triggering the drums directly from the drum machine's pads.

Okay, I thought; such is life. My next hurdle was to then see if I could get a suite of sounds on the DR-550 to play from the KSP; the idea was simple: use the KSP's extended range to play more sounds than are available on the unit itself. AND THIS WORKS -- kinda, sorta. The issue is that you can still only assign the 12 pads to specific MIDI notes ... so the rest is just a random soup of sounds, which was very difficult to recall which notes, on which octave, triggered which sounds.
FINALLY, I had a bit of a breakthrough, but using the BeatStep Pro. Setting the BSP to Custom mode for the Drum sequencer, I was able to customise each pad so that it triggered the exact drum sounds I wanted without having to resort to using traditional keys and without having to remap the drum machine itself, which would ultimately leave me with 4 unused pads.
SOOOOO .... that's Step One accomplished!
