I'd want a few hard copies to place strategically in the studio, give to family/friends, etc., with my name front and center! I don't suppose SOS could have a few copies of the corrected title page printed up? It could then be displayed with each page loose (in a laminated binder, e.g.,), and the SOS "fix" wouldn't have to involve re-binding the entire issue.
Just a thought, probably not a good one, but that's how one thinks when they're not famous like that!
Posts:5118Joined: Fri Jan 10, 2003 12:00 amLocation: Hampton Roads, Virginia, USA
Home of the The SLUM Tapes (Shoulda Left Un-Mixed), mangled using Cubase Pro 14; W10 64 bit on Intel i5-4570 3.2GHz,16GB RAM;Steinberg UR28M interface; Juno DS88; UAD2 Solo/Native; Revoice Pro
alexis wrote:I'd want a few hard copies to place strategically in the studio, give to family/friends, etc., with my name front and center! I don't suppose SOS could have a few copies of the corrected title page printed up? It could then be displayed with each page loose (in a laminated binder, e.g.,), and the SOS "fix" wouldn't have to involve re-binding the entire issue.
Just a thought, probably not a good one, but that's how one thinks when they're not famous like that!
I usually put my name on masking tape over other people's articles so i'm used to that
ezza wrote:I couldn't read the whole article but I got as far as the clean install part.
If you want a clean install you can do it without purchasing a license. You have to upgrade your PC with the Windows 10 upgrader first. This registers your hardware with Microsoft. After that you can do a fresh install from a DVD or USB drive and you PC will authorize automatically.
Once you are sure that you don't want to go back to the previous OS you can recover a substantial chunk of disk space by deleting it. Instructions here:
ef37a wrote:The Post Ghost has struck again!
I was sure I asked if the factory recovery partition on my HP laptop would allow a return to W7 at any time if I went ahead and installed the free W10?
Dave.
The Windows 10 installer will back up your Win 7 install and revert back to it (with all your settings and programs intact) whether you have a recovery partition or not.
ef37a wrote:The Post Ghost has struck again!
I was sure I asked if the factory recovery partition on my HP laptop would allow a return to W7 at any time if I went ahead and installed the free W10?
Dave.
The Windows 10 installer will back up your Win 7 install and revert back to it (with all your settings and programs intact) whether you have a recovery partition or not.
Really? Not the impressive I have got. So, I have ABSOLUTLY NOTHING TO FEAR INSTALLING W10 ON THIS LAPPY?
ef37a wrote:The Post Ghost has struck again!
I was sure I asked if the factory recovery partition on my HP laptop would allow a return to W7 at any time if I went ahead and installed the free W10?
Dave.
The Windows 10 installer will back up your Win 7 install and revert back to it (with all your settings and programs intact) whether you have a recovery partition or not.
Really? Not the impressive I have got. So, I have ABSOLUTLY NOTHING TO FEAR INSTALLING W10 ON THIS LAPPY?
Posts:5118Joined: Fri Jan 10, 2003 12:00 amLocation: Hampton Roads, Virginia, USA
Home of the The SLUM Tapes (Shoulda Left Un-Mixed), mangled using Cubase Pro 14; W10 64 bit on Intel i5-4570 3.2GHz,16GB RAM;Steinberg UR28M interface; Juno DS88; UAD2 Solo/Native; Revoice Pro
ef37a wrote:The Post Ghost has struck again!
I was sure I asked if the factory recovery partition on my HP laptop would allow a return to W7 at any time if I went ahead and installed the free W10?
Dave.
The Windows 10 installer will back up your Win 7 install and revert back to it (with all your settings and programs intact) whether you have a recovery partition or not.
Really? Not the impressive I have got. So, I have ABSOLUTLY NOTHING TO FEAR INSTALLING W10 ON THIS LAPPY?
After the upgrade your old Win 7 install is backed up in a folder on your C drive. You can revert back to it if you don't want to stay on Win 10. (I think it's an option if you boot into the advanced options with F8 on start-up).
However, I have not done it myself so I can't vouch for how well it works. As ever, in these situations, Google is your friend!
Dear Mods/Masters of the Universe ... wondering if a link to Robin Vincent's excellent article (referenced in the OP) might be well-placed as a sticky at least for a while?
Posts:5118Joined: Fri Jan 10, 2003 12:00 amLocation: Hampton Roads, Virginia, USA
Home of the The SLUM Tapes (Shoulda Left Un-Mixed), mangled using Cubase Pro 14; W10 64 bit on Intel i5-4570 3.2GHz,16GB RAM;Steinberg UR28M interface; Juno DS88; UAD2 Solo/Native; Revoice Pro
I hope this article might be useful to some people here. I put a lot of time into getting the information right and speaking to the right people at Microsoft about it. Solid information can be hard to find so hopefully this is helpful to the conversation.
Cheers
Robin
Since nobody seems to have said it (but I'm sure everyone thinks it ): well done, very good article and it is actually convincing me to give W10 a try (on my new build, not on the laptop).
I don't think I know how to do it. What drivers do I need to make sure about? Interface, check. Video monitor will be taken care of automatically? What else? Will plugins that run on Win 7 run on Win 10? I hate this stuff cuz I don't understand it, but I think I'm going to do it.
I now have W10 on the "second best" music PC. Bit of a long winded process but no glitches.
A day or so ago I downloaded (on a W7 machine!) the W10 drivers for my NI KA6 and burned them to a DVD. Finding "Computer" in 10 was tricky but then I found the DVD drive and ran the drivers.
No sweat, just did the bizz and on connecting the AI it was found and worked straight off the bat. I then left it running all day on Radio 3 and it never missed a beat. After about 3 hours there was a "ClangWhooshe" sort of sound. I found "Banner Sounds" and turned them all off. No more clang.
I find ten bloody awful to be frank, almost nothing is the same or where it was in 7 and this PC will hardly ever be used except for curiosity. I shall certainly resist putting what someone descried as "Windows 7 with a tablet bolted on" on any of my other computers.
Hi guys! I wanted to start a new thread but not sure of how to do that so apologies for tramping on anyone's feet!
There have been many discussions regarding Win 10 upgrades and possible future problems with Win 10 drivers supporting "Or not" hardware "Old and new" etc...etc... Indeed I had many problems with my Line 6 UX2 when I tried Win 7 on a new hard drive on my old Asus P4P800 as the UX2 would simply not work properly! The Asus P4 MB not good enough to run sataII drive it seemed or run Win 7 without seriously slowing down just about everything making it a total pain to use, so I have relegated that computer to stay on XP which runs flawlessly-ish!
One of the questions I want to ask you guys is: - Is there a non bloated version of Win 10 available??
I only want to use my computer as a DAW music making device, of course all software has to have an OS but I really don't want all the usual bloat and resource using windows crap that normally go's with an windows install!
Also recently I have been trying to investigate and source all the relevant information for building a new Audio work station that will run my favored DAW Sonar X3 and any USB audio interface that will work with windows!? I will of course be trying to use my UX2, however! As I said above it wasn't until I started to research all the new hardware that's available today that I am now well and truly perplexed! I have tried in vane to find any relevant information regarding the strengths or weaknesses of the now it seems favored for gaming Z99 or Z170 motherboards let alone the different Quad or Octa CPU's! I am now in a state of total stagnation computer build wise as I don't know which way to turn Help!!
Now I am only the merest dabbler here but...That Line 6 has W7 (and W10) drivers listed so I suspect there is some other reason you could not get it to work with 7. Others here will surely have some ideas.
As well as this esteemed emporium I have infested at least two other recording forums for many years and cannot recall anyone having a problem with that AI and W7.That is not to say there has never BEEN a problem, just that it is not at all common AFAIK.
As for a new build? You will surely have advice from Olympus in the form of Pete (Scan) and Martin but it seems to this mere mortal that there are very few problems involved these days? I would look for a MOBO with plenty of USB 3 and especially USB 3.1 capability, i5 or i7 CPU, SSD main HDD and a 2TB or bigger spinner for backup. Much depends on what you need/want to do? Easy to go way overboard when all you have is a mic and a guitar!
Win 10 does install a lot of stuff by default, though most of it is pretty easy to uninstall again. It's also easier than ever to decide what gets loaded on start-up, so you only have running what you really need to.