Not sure if I'm in the right section
Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.
No sound from M audio 2496 Error message "audio engine error could not activate asio driver m audio delta"
Re: No sound from M audio 2496 Error message "audio engine error could not activate asio driver m audio delta"
ANTIQCOOL wrote:Not sure if I'm in the right section
Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.
Maybe the unplug/plug action loosened up the PCI card a bit? If you have not done so already, might be worth making sure it's in their tight.
-
- alexis
Longtime Poster - Posts: 5284 Joined: Fri Jan 10, 2003 12:00 am Location: Hampton Roads, Virginia, USA
Home of the The SLUM Tapes (Shoulda Left Un-Mixed), mangled using Cubase Pro 14; W10 64 bit on Intel i5-4570 3.2GHz,16GB RAM;Steinberg UR28M interface; Juno DS88; UAD2 Solo/Native; Revoice Pro
Re: No sound from M audio 2496 Error message "audio engine error could not activate asio driver m audio delta"
That's what I'd suggest trying first of all too 
Martin
Martin
-
- Martin Walker
Moderator -
Posts: 22581 Joined: Wed Jan 13, 2010 8:44 am
Location: Cornwall, UK
Contact: