Hey guys, I had contacted EV this morning for this but they no longer carry this part for this speaker: https://av.loyola.com/products/audio/ev ... tor-i.html
Since I will need to go with a replacement I am not sure of the sizing or material to look for. I am seeing this but not sure if it will work?
https://www.parts-express.com/cat/speak ... ckets/3462
Can anyone tell me which one of these will work for my speaker please if this is the right part? the description is showing as "top hat" so I am not not sure.
Pole mount cup for EV Eliminator I Speaker?
Re: Pole mount cup for EV Eliminator I Speaker?
If you look at the Architect specifications in the product pdf, you’ll see this:
“The system shall include a 1 3/8-in. stand-mount adapter.”
That’s good because it’s a very standard size. So any of the 1 3/8” adapters at that parts express link that will fit into the hole and mount securely will work. If the adapter is still around, or you have one in another EV speaker, take it out and measure it.
“The system shall include a 1 3/8-in. stand-mount adapter.”
That’s good because it’s a very standard size. So any of the 1 3/8” adapters at that parts express link that will fit into the hole and mount securely will work. If the adapter is still around, or you have one in another EV speaker, take it out and measure it.
-
- resistorman
Frequent Poster - Posts: 2932 Joined: Sun Nov 22, 2015 12:00 am Location: Asheville NC
"The Best" piece of gear is subjective.