Zoom h6 hissing and whistling noise when i touch the screen

All about the tools and techniques involved in capturing sound, in the studio or on location.

Moderator: Moderators

Post Reply

Zoom h6 hissing and whistling noise when i touch the screen

Post by shady corleone »

Whenever i touch the zoom h6 screen while recording with a connected xlr microphone or a mic trough the 3.5mm jack i get some annoying whistling noise And the noise isnt there when iam using the xy mic in the recorder itself .
So is thats normal or there is something wrong with it and i should return it ?
shady corleone
Posts: 3 Joined: Wed Apr 28, 2021 5:17 am

Re: Zoom h6 hissing and whistling noise when i touch the screen

Post by Mike Stranks »

Welcome! :thumbup:

Is this on battery or mains-power or both?
Mike Stranks
Jedi Poster
Posts: 10467 Joined: Fri Jan 03, 2003 12:00 am

Re: Zoom h6 hissing and whistling noise when i touch the screen

Post by shady corleone »

Mike Stranks wrote:Welcome! :thumbup:

Is this on battery or mains-power or both?

Its on a battery that came with the recorder
shady corleone
Posts: 3 Joined: Wed Apr 28, 2021 5:17 am

Re: Zoom h6 hissing and whistling noise when i touch the screen

Post by Mike Stranks »

Hmmm... difficult to say without detailed testing, but I'd be minded to ask for a replacement.

Have you tried a different balanced mic, different cable etc?
Mike Stranks
Jedi Poster
Posts: 10467 Joined: Fri Jan 03, 2003 12:00 am

Re: Zoom h6 hissing and whistling noise when i touch the screen

Post by shady corleone »

Mike Stranks wrote:Hmmm... difficult to say without detailed testing, but I'd be minded to ask for a replacement.

Have you tried a different balanced mic, different cable etc?

I used a dynamic microphone with an xlr cable and rode video micro through 3.5mm jack and i tried an aux cable insted of the rode cable and the whistling noise was so loud especially when i brought the cable close to the screen . Kind of noise that kept my ear buzzing for an hour
shady corleone
Posts: 3 Joined: Wed Apr 28, 2021 5:17 am
Post Reply