Hi - I recently did an outdoor recording with the Zoom F6 and audio Technical BP4025 stereo mic. However, when I loaded the file into ProTools, the recording was in mono (a stereo track with identical L & R channels). I used 32-bit Float.
And advice on how to set it up to record stereo properly?
Many thanks!
Zoom F6: recording with stereo mic
Moderator: Moderators
Zoom F6: recording with stereo mic
-
- cmkinsella
- Posts: 1 Joined: Mon May 10, 2021 5:10 pm
Re: Zoom F6: recording with stereo mic
I suspect you've imported the stereo mix track, but failed to set the mix pan controls fully left and right on the F6.
You should have the original left and right iso channel (individual source) tracks available to import.
You should have the original left and right iso channel (individual source) tracks available to import.
Last edited by Hugh Robjohns on Mon May 10, 2021 5:42 pm, edited 1 time in total.
- Hugh Robjohns
Moderator -
Posts: 38971 Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Contact:
Technical Editor, Sound On Sound...
(But generally posting my own personal views and not necessarily those of SOS, the company or the magazine!)
In my world, things get less strange when I read the manual...
(But generally posting my own personal views and not necessarily those of SOS, the company or the magazine!)
In my world, things get less strange when I read the manual...