New Hydrasynth Models

For fans of synths, pianos, organs or keyboard instruments of any sort.

Re: New Hydrasynth Models

Post by Zukan »

The Elf wrote: Tue Sep 14, 2021 9:10 am Those of us who attended the 'bring a cake, win a synth' at the last meeting now get a free synth every month for life. I didn't realise you didn't get in on it, Zuke! ;):lol:

No one mentioned cake.
Why did no one mention cake?
User avatar
Zukan
Moderator
Posts: 9972 Joined: Fri Sep 12, 2003 12:00 am
'Shaka. When the walls fell. Zukan...with his arms wide.'

Samplecraze
1-2-1 Tuition

Re: New Hydrasynth Models

Post by Folderol »

Zukan wrote: Tue Sep 14, 2021 8:48 am Who are you lot sleeping with? It seems you buy a synth every other week. I need to change my client list. Maybe working the Yemeni angle wasn't so prudent.

I'm still saving up for a Midisport 4x4.

Maybe we need a "Desitute Muso" forum - I'd be spending a lot of time there too!
User avatar
Folderol
Jedi Poster
Posts: 19054 Joined: Sat Nov 15, 2008 12:00 am Location: The Mudway Towns, UK
Yes. I am that Linux nut {apparently now an 'elderly'}
Onwards and... err... sideways!

Re: New Hydrasynth Models

Post by Luke W »

Eddy Deegan wrote: Tue Sep 14, 2021 2:57 am One external lump doesn't seem too bad but once you have many, a small number of which don't play well with accompanying devices in adjacent sockets, it becomes an absolute nightmare.


Eddy Deegan wrote: Tue Sep 14, 2021 2:57 am Further, the flimsy leads on externals are fixed length and often too short. If they're not too short they're too long. If everything used IEC sockets I'd be far better off organisationally. If you have a built-in supply you can use the correct cable length for the requirement. Thicker cables, yes, but far preferable due to no lumps, more sturdiness and a consistent aesthetic right down to the plug.

This sums up what I was too tired to type last night very well. Wiring racks etc and having to accommodate external lumps and have the cable lengths dictate where things can go is infuriating. There are always ways to make it work, and I've taken fairly extreme measures in some builds, but wherever possible I try to avoid gear that requires said effort.
User avatar
Luke W
Frequent Poster
Posts: 1618 Joined: Thu Feb 19, 2009 12:00 am Location: Northamptonshire, UK

Re: New Hydrasynth Models

Post by Zukan »

Folderol wrote: Tue Sep 14, 2021 9:17 am
Zukan wrote: Tue Sep 14, 2021 8:48 am Who are you lot sleeping with? It seems you buy a synth every other week. I need to change my client list. Maybe working the Yemeni angle wasn't so prudent.

I'm still saving up for a Midisport 4x4.

Maybe we need a "Desitute Muso" forum - I'd be spending a lot of time there too!

I like that.
User avatar
Zukan
Moderator
Posts: 9972 Joined: Fri Sep 12, 2003 12:00 am
'Shaka. When the walls fell. Zukan...with his arms wide.'

Samplecraze
1-2-1 Tuition

Re: New Hydrasynth Models

Post by N i g e l »

Zukan wrote: Tue Sep 14, 2021 9:16 am FS1R?

yeah thats the one. It had an IEC cable but used to nag "Replace battery CR2032", which made me sad..... another 10 years had passed.
User avatar
N i g e l
Frequent Poster
Posts: 4134 Joined: Sun Aug 12, 2018 2:40 pm Location: British Isles

Re: New Hydrasynth Models

Post by Zukan »

I've owned a number of them before. The classic 'I sell it then realise my mistake and buy another one'. I wish I'd kept it though because it really was damn good even with the painful editing.
User avatar
Zukan
Moderator
Posts: 9972 Joined: Fri Sep 12, 2003 12:00 am
'Shaka. When the walls fell. Zukan...with his arms wide.'

Samplecraze
1-2-1 Tuition

Re: New Hydrasynth Models

Post by N i g e l »

If you ever get the FS1r urge again, be sure to checkout the MODX 1st [or MONTAGE for those on the synths for cakes scheme].

FS1r was FM & formant whereas MODX is FM & samples but it has formant filters, multiple parts & motion sequencing which might be an equivilent and faster to set up !

I think there are tools for transfering DX7 patches to the MODX [ alot of the FS1r presets were DX7 patches layered up with added Fx]

MODX factory presets dont do it justice.
User avatar
N i g e l
Frequent Poster
Posts: 4134 Joined: Sun Aug 12, 2018 2:40 pm Location: British Isles

Re: New Hydrasynth Models

Post by John Stafford »

I don't mind external PSUs if they have a separate mains cable. I hate the ones that are just a fat plug.
John Stafford
Regular
Posts: 156 Joined: Sat Jun 27, 2020 8:51 am Location: Ireland

Re: New Hydrasynth Models

Post by Drew Stephenson »

Eddy Deegan wrote: Tue Sep 14, 2021 2:57 amThe reason I want them is because I have getting on for 30 synthesizers...

...I don't care about the cost, I don't care about the technicalities. I'm a consumer for whom companies are building these instruments and devices...

Whilst I appreciate that you alone may be a significant part of their market share ;) I humbly suggest that you might not be a 'typical' customer... ;)
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26547 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: New Hydrasynth Models

Post by Folderol »

I rather suspect that if given a free choice at the same price the majority of people would chose kit with a built-in PSU - not that there's any way to prove it!

Also, I suspect that there are relatively few items of kit that can safely run off an unregulated 12V supply (as per resistorman).
User avatar
Folderol
Jedi Poster
Posts: 19054 Joined: Sat Nov 15, 2008 12:00 am Location: The Mudway Towns, UK
Yes. I am that Linux nut {apparently now an 'elderly'}
Onwards and... err... sideways!

Re: New Hydrasynth Models

Post by Zukan »

N i g e l wrote: Tue Sep 14, 2021 10:05 am If you ever get the FS1r urge again, be sure to checkout the MODX 1st [or MONTAGE for those on the synths for cakes scheme].

FS1r was FM & formant whereas MODX is FM & samples but it has formant filters, multiple parts & motion sequencing which might be an equivilent and faster to set up !

I think there are tools for transfering DX7 patches to the MODX [ alot of the FS1r presets were DX7 patches layered up with added Fx]

MODX factory presets dont do it justice.

I'll look into that. Thanks.
User avatar
Zukan
Moderator
Posts: 9972 Joined: Fri Sep 12, 2003 12:00 am
'Shaka. When the walls fell. Zukan...with his arms wide.'

Samplecraze
1-2-1 Tuition

Re: New Hydrasynth Models

Post by ramthelinefeed »

Hey, PolyAT you guys! :clap:
ramthelinefeed
Frequent Poster
Posts: 2406 Joined: Mon Jun 23, 2003 12:00 am Location: UK
A weasel hath not such a deal of spleen as you are tossed with! 

Re: New Hydrasynth Models

Post by Drew Stephenson »

Folderol wrote: Tue Sep 14, 2021 12:26 pm I rather suspect that if given a free choice at the same price the majority of people would chose kit with a built-in PSU - not that there's any way to prove it!

I suspect that those who thought about it would (I'm one of them too) but what percentage of potential buyers that would be is another question.
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26547 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: New Hydrasynth Models

Post by Eddy Deegan »

Zukan wrote: Tue Sep 14, 2021 2:23 pm
N i g e l wrote: Tue Sep 14, 2021 10:05 am If you ever get the FS1r urge again, be sure to checkout the MODX 1st [or MONTAGE for those on the synths for cakes scheme].

FS1r was FM & formant whereas MODX is FM & samples but it has formant filters, multiple parts & motion sequencing which might be an equivilent and faster to set up !

I think there are tools for transfering DX7 patches to the MODX [ alot of the FS1r presets were DX7 patches layered up with added Fx]

MODX factory presets dont do it justice.

I'll look into that. Thanks.

I bought my wife half a MODX recently (she bought the other half) and it's actually really good. Sounds great, small and light, 8-op FM synth as well as AWM2, 16 layers per performance and multiple arpeggiators that can run simultaneously and aren't 'stupid' in that they respond to what you're playing.

Phil "Bad Mister" Clendeninn at Yamaha did a bit of write-up on FM in the MODX here: https://yamahasynth.com/learn/modx/mast ... ion-part-i
User avatar
Eddy Deegan
Moderator
Posts: 9283 Joined: Wed Sep 01, 2004 12:00 am Location: Brighton & Hove, UK
Some of my works | The SOS Forum Album projects  

Re: New Hydrasynth Models

Post by Eddy Deegan »

blinddrew wrote: Tue Sep 14, 2021 12:02 pm
Eddy Deegan wrote: Tue Sep 14, 2021 2:57 am ...I don't care about the cost, I don't care about the technicalities. I'm a consumer for whom companies are building these instruments and devices...

Whilst I appreciate that you alone may be a significant part of their market share ;) I humbly suggest that you might not be a 'typical' customer... ;)

You're not wrong, but then again neither am I ;)
User avatar
Eddy Deegan
Moderator
Posts: 9283 Joined: Wed Sep 01, 2004 12:00 am Location: Brighton & Hove, UK
Some of my works | The SOS Forum Album projects  

Re: New Hydrasynth Models

Post by Drew Stephenson »

Eddy Deegan wrote: Tue Sep 14, 2021 10:33 pm
blinddrew wrote: Tue Sep 14, 2021 12:02 pm
Eddy Deegan wrote: Tue Sep 14, 2021 2:57 am ...I don't care about the cost, I don't care about the technicalities. I'm a consumer for whom companies are building these instruments and devices...

Whilst I appreciate that you alone may be a significant part of their market share ;) I humbly suggest that you might not be a 'typical' customer... ;)

You're not wrong, but then again neither am I ;)

Win Win! :D
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26547 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: New Hydrasynth Models

Post by t-sun »

blinddrew wrote: Sat Sep 11, 2021 7:14 pm Dare I suggest that perhaps you, and indeed most of us on this forum, are not entirely representative of the entire target market for musical instruments; being as we are, ahem, slightly older and probably slight more well-heeled than the average aspiring musician? ;)

We are very good at extrapolating our own requirements out and spending other people's money here. :D

I would not qualify myself as particularly well-heeled, over the course of twenty or so years of music equipment trading I've spent over $1k USD on one bit of kit (an 808, which I subsequently sold for rent money soon after, sigh). So, I'm happy to make do and just find the wall wart thing to be a necessary evil for my cheap but effective gear. I'm extremely excited about the Explorer, and am definitely going to buy one, but for $600 it's perfectly understandable to make a few compromises and frankly the features blow me away entirely (built in OLED oscilloscope is just such a nice touch).

The biggest problem with the wall warts is that they take up so much space on a power strip or conditioner, which requires a short extension cord. If building in an IEC type power supply is unfeasible, the power adapter that came with the Microbrute is a much better solution, because it has a second (replaceable, standard) cable that goes from the adapter to the wall, similar to a laptop supply. Never understand why other makers don't use similar supplies, at least they avoid the problem of blocked sockets.
t-sun
Regular
Posts: 262 Joined: Mon Jan 18, 2021 6:31 am

Re: New Hydrasynth Models

Post by Hugh Robjohns »

I've been trying to get a handle on the actual extra costs and time involved in building an SMPS into a product instead of employing an already-approved external unit to supply low-voltage DC to the product.

I've talked with a few product designers and manufacturers in the UK and they are all saying very similar things.

Every new product has to be tested to comply with the EMC standards for the countries they wish to sell into, and those standards are extensive. Japan and South Korea have particularly stringent requirements, apparently. One manufacturer supplied this list of required standards to give an idea of the complexity:

•EN 55032:2015, Class B
•EN 55016-2-1:2009 A1 2011
•EN 55016-2-3:2010 A1 2010
•EN 55035:2017
•EN61000-4-2:2009
•EN 61000-4-3:2006 A1 2008 A2 2010
•EN 61000-4-4:2012
•EN 61000-4-5:2014 A1 2017
•EN 61000-4-6:2014
•EN 6100-4-11:2004 A1 2017
•EN 61000-3-2:2014
•EN 61000-3-2:2013
•FCC Part 15B Class B
•ANSI C63.4:2014
•ICES-003 Issue 6: Class B

...and this is just for using an external pre-certified SMPS 'line lump' supply.

Testing EMC compliance with an already-approved line-lump power unit typically costs around £10k, but if the EMC tests fail for any reason, the cause has to be identified, rectified, and the product retested... for the same cost again.

So if the manufacturer expects to sell 1000 items, say, (which is fairly typical for the low-volume products we're talking about) the EMC testing adds £10 to the cost of every product leaving the factory. That becomes around £50 added to price for each unit sold to a customer after distribution and retailer markups and sales taxes. In a highly competitive market place, that is a significant factor in a devices' financial viability.

If, instead, the product is fitted with a mains inlet, the testing regime becomes a whole lot more complex -- even when using an internal OEM SMPS power unit. Depending on how the company goes about the overall product design, an internal PSU can apparently add further testing and certification costs of over £12k, which are in addition to the standard EMC certification costs, and a hike to the retail price of around £75-100. It is also likely to involve more internal metal screening which obviously add to the mechanical design and construction costs, as well as increasing weight and this potentially adding to the shipping costs.

In addition to that, some of those I talked with discussed other significant practical benefits to using external SMPS line-lump power supplies. Many revolve around keeping the inherent fast switching transients and other electronic noise away from sensitive audio circuitry -- particularly relevant to things like mic preamps, of course. However, it also means the product can be made smaller and lighter as it needs less internal metal shielding, and these factors are often relevant concerns in keyboards.

So it really comes down to whether enough people would be prepared to pay, say £1600 or more for an instrument with an internal PSU instead of £1500 or less for one with an external PSU.

In such a fiercely competitive market place, the general feeling from those I've talked to is no -- they believe few of their customers would be prepared to pay an extra £100 or more just for the luxury of an internal mains PSU. It might be different with high-end 'professional products'... although the pro market is even smaller and increasingly using semi-pro products for price reasons!

I know these points have been discussed before, but I thought it helpful to have some real world numbers to mull over.
User avatar
Hugh Robjohns
Moderator
Posts: 40596 Joined: Fri Jul 25, 2003 12:00 am Location: Worcestershire, UK
Technical Editor, Sound On Sound...
(But generally posting my own personal views and not necessarily those of SOS, the company or the magazine!)
In my world, things get less strange when I read the manual... 

Re: New Hydrasynth Models

Post by Folderol »

Interesting. Things (and especially costs) have changed a lot since I last had any involvement in this sort of thing. Changes the perspective somewhat :(
User avatar
Folderol
Jedi Poster
Posts: 19054 Joined: Sat Nov 15, 2008 12:00 am Location: The Mudway Towns, UK
Yes. I am that Linux nut {apparently now an 'elderly'}
Onwards and... err... sideways!

Re: New Hydrasynth Models

Post by t-sun »

That's an extremely good breakdown, thank you. If the volume of expected sales really is as low as 1000 units then it certainly does make sense. I'm surprised that in this day, which seems like a renaissance of synth hardware interest, that the unit volume would be so low for a global product, but it is a crowded market.

On a different note, I hadn't seen this mentioned yet. Forgive me if it's come up:
https://www.youtube.com/watch?v=1sPns38hevQ

https://audiocookbook.org/hydramorph/

The Hydrasynth has a built-in randomizer feature, of course, but given the menu system (which you can never judge until you lay hands on it, in my experience) having what's effectively a patch editor with some extra features available is great. Reminds me of the stuff that people used to put out for Atari ST way back when.
t-sun
Regular
Posts: 262 Joined: Mon Jan 18, 2021 6:31 am

Re: New Hydrasynth Models

Post by N i g e l »

t-sun wrote: Wed Sep 15, 2021 7:34 pm That's an extremely good breakdown, thank you. If the volume of expected sales really is as low as 1000 units then it certainly does make sense. I'm surprised that in this day, which seems like a renaissance of synth hardware interest, that the unit volume would be so low for a global product, but it is a crowded market.

some of the all time big sellers were -

M1: 250,000
DX7: 200,000 units in 1st 3 years
Microkorg: 100,000

numbers are from the WWW & may be approximate
User avatar
N i g e l
Frequent Poster
Posts: 4134 Joined: Sun Aug 12, 2018 2:40 pm Location: British Isles

Re: New Hydrasynth Models

Post by Martin Walker »

John Stafford wrote: Tue Sep 14, 2021 10:22 am I don't mind external PSUs if they have a separate mains cable. I hate the ones that are just a fat plug.

I believe the distinction is that those with a separate mains cable generally get called 'line lumps', whereas the ones with the PSU built into the mains plug are termed 'wall warts'.

Martin
User avatar
Martin Walker
Moderator
Posts: 20920 Joined: Wed Jan 13, 2010 8:44 am Location: Cornwall, UK

Re: New Hydrasynth Models

Post by resistorman »

Martin Walker wrote: Wed Sep 15, 2021 11:26 pm
John Stafford wrote: Tue Sep 14, 2021 10:22 am I don't mind external PSUs if they have a separate mains cable. I hate the ones that are just a fat plug.

I believe the distinction is that those with a separate mains cable generally get called 'line lumps', whereas the ones with the PSU built into the mains plug are termed 'wall warts'.

Martin

A lot of gear runs on standard voltages with somewhat standard coaxial plugs, so it's easy to swap out the type of PSU.
User avatar
resistorman
Frequent Poster
Posts: 2789 Joined: Sun Nov 22, 2015 12:00 am Location: Asheville NC
"The Best" piece of gear is subjective.

Re: New Hydrasynth Models

Post by Eddy Deegan »

Martin Walker wrote: Wed Sep 15, 2021 11:26 pm
John Stafford wrote: Tue Sep 14, 2021 10:22 am I don't mind external PSUs if they have a separate mains cable. I hate the ones that are just a fat plug.

I believe the distinction is that those with a separate mains cable generally get called 'line lumps', whereas the ones with the PSU built into the mains plug are termed 'wall warts'.

That's a good point Martin. Korg have done a few line lumps over the years (the Triton Rack and KingKorg spring to mind; I'm sure there are more) and I can sort of live with them. They are external of course but at least they are flexibly external. I have three eurorack power supplies of the same ilk.

So in light of your wise observation I will retrospectively clarify that my previous rant was pretty much exclusively aimed at wall warts!

This isn't to say I want a load of line lumps either though... at present they are fewer in number and as such less of a pain for me right now.
User avatar
Eddy Deegan
Moderator
Posts: 9283 Joined: Wed Sep 01, 2004 12:00 am Location: Brighton & Hove, UK
Some of my works | The SOS Forum Album projects  
Post Reply