2 months later ...
I'm finally able to pull down this patch, photograph the complete setup, and post it here!
This was a fun, time-consuming, and challenging project; I learned a lot about what I like and don't like, my workflow, and live composition and performance with the modular.
I admit, it will be a relief to step away from the patch cables for a while! I don't even know what the modular looks like unpatched.
Here we go -- single-skiff performance synth in 104hp?
Moderator: Moderators
Re: Here we go -- single-skiff performance synth in 104hp?
Sorry for the delay in getting this done, it was a semi-daunting project getting everything labeled clearly!
This is the CONTROL SKIFF:
And this is the VOICE SKIFF:
There are a total of five melodic voices and four percussion voices.
The signal flow breakdown is below. Unless otherwise noted, the call outs are [CV or pitched audio related to that CV]/[VCA envelope]/[VCF envelope]
VOICE A/B/C
Oscillation #1/Make Noise Dynamix
VOICE D/E/F
Oscillation #2/Doepfer SEM
VOICE G/H/I
Subharmonicon #1/Doepfer LPF #1
VOICE J/K/L
Subharmonicon #2/Doepfer LPF #2
VOICE M/N/O
Mother-32
VOICE P/Q/R/S
808 kick, snare, open hihat, closed hihat
Z
Clock input from DAW
1-2
LFOs for PWM on Oscillation #1 and 2
This is the CONTROL SKIFF:
And this is the VOICE SKIFF:
There are a total of five melodic voices and four percussion voices.
The signal flow breakdown is below. Unless otherwise noted, the call outs are [CV or pitched audio related to that CV]/[VCA envelope]/[VCF envelope]
VOICE A/B/C
Oscillation #1/Make Noise Dynamix
VOICE D/E/F
Oscillation #2/Doepfer SEM
VOICE G/H/I
Subharmonicon #1/Doepfer LPF #1
VOICE J/K/L
Subharmonicon #2/Doepfer LPF #2
VOICE M/N/O
Mother-32
VOICE P/Q/R/S
808 kick, snare, open hihat, closed hihat
Z
Clock input from DAW
1-2
LFOs for PWM on Oscillation #1 and 2