"bracket" or stay for a floor monitor, prone to rolling, needed...
"bracket" or stay for a floor monitor, prone to rolling, needed...
If such a thing exists?
I've got a couple of the JBL Eon 10's as floor monitors and they do have the angled corner but it's only JUST enough and they are prone to rolling over.
Is there any sort of angled bracket or stay to keep them from doing this?
I've got a couple of the JBL Eon 10's as floor monitors and they do have the angled corner but it's only JUST enough and they are prone to rolling over.
Is there any sort of angled bracket or stay to keep them from doing this?
-
- pax-eterna
Regular - Posts: 166 Joined: Sun Apr 22, 2007 12:00 am
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
I've seen homemade wooden cradles for them. Doubt there's a commercial product.
- resistorman
Frequent Poster - Posts: 2773 Joined: Sun Nov 22, 2015 12:00 am Location: Asheville NC
"The Best" piece of gear is subjective.
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
pax-eterna wrote: ↑Thu Nov 25, 2021 2:44 am If such a thing exists?
I've got a couple of the JBL Eon 10's as floor monitors and they do have the angled corner but it's only JUST enough and they are prone to rolling over.
Is there any sort of angled bracket or stay to keep them from doing this?
There certainly are stands specifically designed to support monitors... I have two and they worked well on the couple of occasions when I used them. They fold completely flat so are easily transportable. I haven't a clue where I bought them or the brand.
PM me for pics if you want to know more... and if you're in the UK we could probably come to 'an arrangement' as I no longer use them...
Update: Just done some rootling... they are Stagg GAS-3.2
-
- Mike Stranks
Jedi Poster - Posts: 10588 Joined: Fri Jan 03, 2003 12:00 am
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
Studiospares used to sell monitor stands for their own brand speakers. I don't know if they still do.
- James Perrett
Moderator -
Posts: 14923 Joined: Mon Sep 10, 2001 12:00 am
Location: The wilds of Hampshire
Contact:
JRP Music - Audio Mastering and Restoration. JRP Music Facebook Page
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
Mike Stranks wrote: ↑Thu Nov 25, 2021 8:15 am
There certainly are stands specifically designed to support monitors... I have two and they worked well on the couple of occasions when I used them. They fold completely flat so are easily transportable. I haven't a clue where I bought them or the brand.
PM me for pics if you want to know more... and if you're in the UK we could probably come to 'an arrangement' as I no longer use them...
Update: Just done some rootling... they are Stagg GAS-3.2
Cool, thanks. I'll research them. I am in Oz so probs not practical
-
- pax-eterna
Regular - Posts: 166 Joined: Sun Apr 22, 2007 12:00 am
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
James Perrett wrote: ↑Thu Nov 25, 2021 1:22 pm Studiospares used to sell monitor stands for their own brand speakers. I don't know if they still do.
thank you I will have a look.
-
- pax-eterna
Regular - Posts: 166 Joined: Sun Apr 22, 2007 12:00 am
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
Thanks, but neither are really suitable for the application. I might get some solid foam and make some cutouts in the shape of the speaker back. It just needs to stop the ease with which it can roll so doesn't need to be much.
-
- pax-eterna
Regular - Posts: 166 Joined: Sun Apr 22, 2007 12:00 am
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
I just made a couple of wooden wedges and put some grip tape on one side.
- Drew Stephenson
Apprentice Guru -
Posts: 26279 Joined: Sun Jul 05, 2015 12:00 am
Location: York
Contact:
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
I've had a similar issue recently. The amp stand wasn't appropriate because they're designed for guitar amps with connections on the front and powered speakers with connections on the back are vulnerable to damage and some of the people I work with are a bit clumsy.
Wooden wedges are good but move about in relation to each other (front/rear) and can be a bit heavy.
My latest prototype which I haven't used in anger yet involves lengths of garden shed guttering (small, light, black) used as an arched wedge, one at the front and two shorter at the back with a gap between for connections, all held together with some neoprene sheet from a kitchen centre (fancy placemat). The whole thing rolls up into itself for transport.
Wooden wedges are good but move about in relation to each other (front/rear) and can be a bit heavy.
My latest prototype which I haven't used in anger yet involves lengths of garden shed guttering (small, light, black) used as an arched wedge, one at the front and two shorter at the back with a gap between for connections, all held together with some neoprene sheet from a kitchen centre (fancy placemat). The whole thing rolls up into itself for transport.
-
- shufflebeat
Longtime Poster - Posts: 9335 Joined: Sun Dec 09, 2007 12:00 am Location: Manchester, UK
“…I can tell you I don't have money, but what I do have are a very particular set of skills. Skills I have acquired over a very long career” - (folk musician, Manchester).
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
Fair enough all...
... anyone interested in two virtually new guitar amp stands?
... anyone interested in two virtually new guitar amp stands?
-
- Mike Stranks
Jedi Poster - Posts: 10588 Joined: Fri Jan 03, 2003 12:00 am
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
shufflebeat wrote: ↑Fri Nov 26, 2021 6:52 am Wooden wedges are good but move about in relation to each other (front/rear) and can be a bit heavy.
Hence the grip tape. If you've not encountered it, it's pretty magical stuff.
- Drew Stephenson
Apprentice Guru -
Posts: 26279 Joined: Sun Jul 05, 2015 12:00 am
Location: York
Contact:
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/
Re: "bracket" or stay for a floor monitor, prone to rolling, needed...
Mike Stranks wrote: ↑Fri Nov 26, 2021 9:57 am Fair enough all...
... anyone interested in two virtually new guitar amp stands?
I should add they make excellent guitar amp stands.
-
- shufflebeat
Longtime Poster - Posts: 9335 Joined: Sun Dec 09, 2007 12:00 am Location: Manchester, UK
“…I can tell you I don't have money, but what I do have are a very particular set of skills. Skills I have acquired over a very long career” - (folk musician, Manchester).