Focusrite Solo, 212 or 4i4?

Discuss the hardware/software tools and techniques involved in capturing sound, in the studio or on location.
Post Reply

Focusrite Solo, 212 or 4i4?

Post by Baldo »

quick question; can all the above DACs be used to record one stereo input for tapes?

I have a friend who wants to convert his cassette tapes to digital and I suggested one of the above. I have a Scarlett Solo but I only use that for playback.

I assume that any of the above will do the job.
Many thanks
Baldo
Baldo
Regular
Posts: 277 Joined: Thu Dec 12, 2002 12:00 am Location: Germany
"Never put a recording studio in your home, it is a black hole into which you can pour unlimited amounts of money" Pete Waterman.

Re: Focusrite Solo, 212 or 4i4?

Post by Drew Stephenson »

The solo does have two inputs but one of them is mic-only. So in practical terms that's not really an option.
The 2i2 has two line inputs so that will do the job with appropriate RCA-TS leads.
The 4i4 is definitely overkill unless he's also thinking of getting into home studio stuff.

However the 2i2 is also probably overkill if all he needs is the line level from a tape converting to a digital signal.
Something like this will almost certainly do the job: https://www.gear4music.com/Recording-an ... erface/AML
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26084 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: Focusrite Solo, 212 or 4i4?

Post by sonics »

I guess it's a laptop computer? Almost all modern desktop computers have perfectly good quality line inputs already.
sonics
Frequent Poster
Posts: 2020 Joined: Wed Jul 16, 2003 12:00 am Location: Canada
 

Re: Focusrite Solo, 212 or 4i4?

Post by James Perrett »

blinddrew wrote: Thu Dec 01, 2022 8:33 pm Something like this will almost certainly do the job: https://www.gear4music.com/Recording-an ... erface/AML

I'm not a fan of those I'm afraid. They are too sensitive for the average cassette deck (some people say that they respond to a Windows mixer control but I've never been able to get mine to do that) and also have a habit of whistling quietly along to the music.

By the time you've bought a pair of attenuators you might as well have bought something like this

https://www.andertons.co.uk/behringer-u ... -interface

or

https://www.andertons.co.uk/recording/a ... -interface

or

https://www.andertons.co.uk/recording/a ... -interface

(NB - I've briefly used the first to check it out for a friend but haven't used the other two).
User avatar
James Perrett
Moderator
Posts: 14830 Joined: Mon Sep 10, 2001 12:00 am Location: The wilds of Hampshire
JRP Music - Audio Mastering and Restoration. JRP Music Facebook Page

Re: Focusrite Solo, 212 or 4i4?

Post by Drew Stephenson »

Ah, ok. I'd heard about the noise issues with the 202 version but I thought it had been fixed with the 222. My bad.
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26084 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: Focusrite Solo, 212 or 4i4?

Post by James Perrett »

blinddrew wrote: Thu Dec 01, 2022 9:14 pm Ah, ok. I'd heard about the noise issues with the 202 version but I thought it had been fixed with the 222. My bad.

The noise problem is very intermittent but annoying when it happens. They are also limited to 16 bits whereas the slightly more expensive interfaces are 24 bit with proper ASIO drivers.
User avatar
James Perrett
Moderator
Posts: 14830 Joined: Mon Sep 10, 2001 12:00 am Location: The wilds of Hampshire
JRP Music - Audio Mastering and Restoration. JRP Music Facebook Page

Re: Focusrite Solo, 212 or 4i4?

Post by Drew Stephenson »

Very vexing. I wasn't worried about the bit depth given the use case. But I'm at risk of drifting off topic so I will retract my earlier suggestion and endorse your follow up! :)
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26084 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: Focusrite Solo, 212 or 4i4?

Post by Baldo »

Thanks for this everyone. It is much appreciated. I think that the best solution will be the 212 in this case. 4i4 is definitely overkill for this situation.

I have a Solo that is great for my needs though.
Baldo
Regular
Posts: 277 Joined: Thu Dec 12, 2002 12:00 am Location: Germany
"Never put a recording studio in your home, it is a black hole into which you can pour unlimited amounts of money" Pete Waterman.

Re: Focusrite Solo, 212 or 4i4?

Post by sonics »

blinddrew wrote: Thu Dec 01, 2022 9:14 pm Ah, ok. I'd heard about the noise issues with the 202 version but I thought it had been fixed with the 222. My bad.

I thought they were exactly the same interface with a different colour and software bundle, actually.
sonics
Frequent Poster
Posts: 2020 Joined: Wed Jul 16, 2003 12:00 am Location: Canada
 

Re: Focusrite Solo, 212 or 4i4?

Post by Drew Stephenson »

sonics wrote: Mon Dec 05, 2022 4:44 pm
blinddrew wrote: Thu Dec 01, 2022 9:14 pm Ah, ok. I'd heard about the noise issues with the 202 version but I thought it had been fixed with the 222. My bad.

I thought they were exactly the same interface with a different colour and software bundle, actually.

From James' experience it sounds like your information is better than mine!
User avatar
Drew Stephenson
Apprentice Guru
Posts: 26084 Joined: Sun Jul 05, 2015 12:00 am Location: York
(The forumuser formerly known as Blinddrew)
Ignore the post count, I have no idea what I'm doing...
https://drewstephenson.bandcamp.com/

Re: Focusrite Solo, 212 or 4i4?

Post by James Perrett »

sonics wrote: Mon Dec 05, 2022 4:44 pm
blinddrew wrote: Thu Dec 01, 2022 9:14 pm Ah, ok. I'd heard about the noise issues with the 202 version but I thought it had been fixed with the 222. My bad.

I thought they were exactly the same interface with a different colour and software bundle, actually.

Yes, they look identical but the Amazon listing says that the 222 comes with some extra software - though I don't remember getting anything with mine.

A friend of mine had a similar looking Phonic Digitrack interface which worked well but it wasn't supported in Windows 10.
User avatar
James Perrett
Moderator
Posts: 14830 Joined: Mon Sep 10, 2001 12:00 am Location: The wilds of Hampshire
JRP Music - Audio Mastering and Restoration. JRP Music Facebook Page
Post Reply