Computer Noise Through Speakers

All about the tools and techniques involved in capturing sound, in the studio or on location.

Moderator: Moderators

Re: Computer Noise Through Speakers

Post by merlyn »

Kerb26 wrote: Sun Nov 28, 2021 7:19 pm Would I go balanced from the audio interface to the isolator, and unbalanced from the isolator to the power amp? Or do I need to keep both the same ie. unbalanced to and from the isolator?

If you have balanced cables (TRS -- TRS) you can use them between the interface and the isolator, then unbalanced between the isolator and the amp.

If you have unbalanced cables (TS -- TS a.k.a an instrument cable) to hand you can use them from the interface and the isolator will still break the ground path, and get rid of the noise.
Frequent Poster
Posts: 515 Joined: Thu Nov 07, 2019 2:15 am
It ain't what you don't know. It's what you know that ain't so.

Re: Computer Noise Through Speakers

Post by Kerb26 »

Thanks to everyone for the advice.
Posts: 15 Joined: Wed May 07, 2014 12:00 am
Post Reply